Product catalogue

DLC gateway IoT

101351

LTE/Ethernet Gateway with Zigbee controller for smart control of luminaires. The device is rack-mountable or can be used as a stand-alone unit.

DLC Gateway IoT Zhaga

101352

LTE Zhaga Gateway with Zigbee for smart control of luminaires. It is mounted in a Zhaga Book 18 standard connector. It includes a sensor input that facilitates lighting operation by general public via external push-button, and has a built-in LCU (Luminaire Control Unit) for automatic local control.

DLC Gateway IoT LX9

101340

LTE/Ethernet Gateway with Zigbee controller for smart control of luminaires. The device has GPS and is prepared for automatic positioning. The device is rack-mountable or can be used as a stand-alone unit.

DLC LCU Z5 Zhaga 

101510 

LCU Z5 Zhaga is a control node intended for integration with LED light sources that support Dali 2.0/D4i and are equipped with Zhaga Book 18 standard connector.

DLC LCU i5 

101523 

DLC LCU i5 is a control node with built-in DALI power that can supply up to 64 devices on a DALI bus. The unit is potted and can withstand harsh Nordic environments, -35°C to +45°C, IP67.

Zhaga junction box

101525 

The Zhaga junction box is designed to simplify the installation of small luminaire control networks. It can be equipped with the DLC Gateway IoT Zhaga or DLC Z5 Zhaga.

Modbus I/O module EX9063D, 8DI/3 relay out w/Watchdog 

101296 

The EX9063DW is a Modbus I/O expansion module for Datek control units that are fitted with a serial communications port. It has 8 digital inputs plus 3 relay outputs as well as a built-in Watchdog for operational monitoring for both itself and the connected device.

Modbus I/O module EX9043, 15DO 

100775 

The EX9093 is a Modbus output expansion module for Datek control units that are fitted with a serial communications port. It has 15 digital open collector type outputs.

Antenna 3-in-1 LTE GNSS Zigbee, 3 x 2 m cables, SMA male, 12 mm mount

101339

Antenna for control unit 101340 DLC Gateway IoT LX9. Combi type with separate LTE, Zigbee and GNSS cables (cable length 2m - with relevant signal marking).

DALI relay module, 2 RM8 8A NO for DIN rail 

101487 

DALI-2 RM8 compact DALI relay module for direct control of 230VAC loads via DALI bus. Easily integrates conventional ballasts into a DALI lighting control system for direct ON-OFF switching. The device is adapted for mounting on DIN rail.

DALI relay module, 2 RM8 8A NO

101488 

DALI-2 RM8 compact DALI relay module for direct control of 230VAC loads via DALI bus. Easily integrates conventional ballasts into a DALI lighting control system for direct ON-OFF switching.

DLC Zhaga light sensor

101493 

The DLC Zhaga Twilight Sensor has been developed by Datek Light Control for installations where a simple and cost-effective solution for local luminaire control via the luminaire's Zhaga Book 18 connector is desired.

Sensor, Comlight, Dali D4i, Radar, Zhaga 

101216 

Comlight Eagle Eye Zhaga is a motion detection sensor for luminaires that complies with the Zhaga Book 18 specification and the SR (System Ready) concept.

Antenna, GSM/Zigbee, 2 x 2 m cables w/SMA male, 12 mm panel mount

101337 

Antenna for control unit 101351 DLC Gateway IoT LX9. Combi type with separate LTE and Zigbee cables (cable length 2m - with relevant signal marking).

Antenna, Zigbee, Shark fin, 2m cable 

101368 

Antenna for connection to 2.4GHz Zigbee networks. Designed for mounting on the side wall of a cabinet. Supplied with fixed 2m cable with SMA connector (male).

Antenna, 4G LTE

101369 

Standard, LTE-only antenna for control units. Supplied with fixed 2m cable with SMA connector (male).

Antenna Zigbee 2.4 GHz

101380 

Antenna for connection to 2.4GHz Zigbee Networks. Supplied with fixed 0.5m cable with SMA connector (male).

Antenna Zigbee 2.4 GHz, Base 20 cm

101393 

A good alternative for Zigbee networks with challenging signal conditions. Base antenna for the 2.4GHz band, has a gain of ≤ 2 dBi. Supplied with wall bracket.

Antenna Zigbee 2.4 GHz, Base 40 cm

101395 

A good alternative for Zigbee networks with challenging signal conditions. Base antenna for the 2.4GHz band, has a gain of ≤ 4 dBi.

Snow plow post, Zigbee 2.4 GHz

101385 

Complete set for the assembly of a 2.4GHz Zigbee antenna top-mounted in a plow post (includes brackets for fixing to cabinet).

Antenna, Zigbee, whip, 0 dB, 30 mm SMA male

100793 

Quarter-wave 2.4 GHz band "stubby" antenna (0dBi) for direct mounting to LCU antenna connection. A convenient solution in areas with strong signal coverage. Often used together with product 101523 DLC LCU i5.

Antenna bracket 30 cm

101490 

Angle bracket (large) for antenna. Primarily used for wall mounting, can also be attached to a pole using suitable mounting straps.

Antenna bracket 12 cm

101489 

Angle bracket (small) for antenna. Primarily used for wall mounting, can also be attached to a pole using suitable mounting straps.

Push button control box

101519 

Push button control box complete with NO contact block. Ideal for installation at for example sports grounds, facilitating on-site lighting operation for general public.

PSensor, Comlight, Dali D4i, Rad

101511 

Combined motion and ambient light sensor.

Adapter SMA male - N male

100570 

Connector adapter. Commonly used for connection between rod type antenna and cable.

Outdoor Light sensor 4-20 mA

101212 

Light sensor (4-20mA) designed for use in outdoor environments. Has six different dip-switch settings for selction of measurement range ( 0...500lux / 1kLux / 2k Lux / 5k Lux / 20 kLux / 60 kLux).

Antenna cable 3 m, LMR195

101370 

Standard antenna cable for use in protected environments such as electrical cabinets. Suitable for both LTE and Zigbee applications.

Antenna cable 30 m, LMR400

101374 

Special cable with very good signal properties and low attenuation. Relatively thick, but still quite flexible when cable-laying. Useful in demanding environments that have poor signal coverage.

Antenna cable 15 m, LMR400

101372 

Special cable with very good signal properties and low attenuation. Relatively thick, but still quite flexible when cable-laying. Useful in demanding environments that have poor signal coverage.

Antenna cable 10 m, LMR200

101375 

A good cable with low attenuation. Useful for areas with weaker signal coverage.

Antenna cable 1m, RG174

101278 

Short standard cable for connecting antenna to units that are in close proximity (in control cabinets for example).

Antenna cable 15 m, LMR200

101376 

A good cable with low attenuation. Useful for areas with weaker signal coverage.

Antenna cable 20 m, LMR400

101373 

Special cable with very good signal properties and low attenuation. Relatively thick, but still quite flexible when cable-laying. Useful in demanding environments that have poor signal coverage.

Antenna cable 6m, LMR195

101371 

Standard antenna cable for use in protected environments such as electrical cabinets. Suitable for both LTE and Zigbee applications.

Powersupply DIN rail 24 VDC 36 W

101399 

Power supply for DIN rail mounting, 24VDC 36W.

Outdoor public push button vandal resistant

101530

Push button box for installation outdoors with large, high-visibility button. Vandal-resistant design.

Antenna, Zigbee, whip, angled 30 mm SMA male

101007 

Quarter-wave 2.4 GHz "stubby" right angle antenna (0dBi) for direct mounting to LCU antenna connection. Often used together with product 101523 DLC LCU i5.

Zhaga adapter for pole or wall

Diverse

Zhaga socket for pole or wall installation (prewired).